哈佛Pump 33雙注射器雙泵頭精密注射泵
（標準注射/回抽）

項目	產品描述
553333	Harvard 33 Twin Syringe Pump

技術參數

553333
類型	帶微處理器的雙驅動單注射器注射/回抽
泵結構	標準
泵功能	注射/回抽
*小流速	0.0004 µl/hr
*大流速	106.6 ml/min
注射器數量	2
注射器架類型	標準支架
注射器*小尺寸	0.5 µl
注射器*大尺寸	140 ml
平均直線推力	57 lbs
壓力	標準
通信等級	2
通信	RS-232, TTL
**度	0.35 %
復現性	0.1 %
非易失性存儲器	存儲所以設置
RS-232	RJ11-4 連接頭
TTL	9-pin連接頭
馬達	兩個電機，從1/2到1/4 微步步進，每個為0.9 ? 步角步進電機
導向螺桿每轉一圈電機前機步數	1,600 at 1/2 stepping; 3,200 at 1/4 stepping
*小步速	27.3 sec/step
*大步速	416.7 µsec/step
步分辨率	0.33 µm/step
推進器移動*小速度	0.726699 µm/min
推進器移動*大速度	95.25 mm/min
顯示	LED, 5 digit, numeric
輸入功率	1.0 A, 45 W
電壓范圍	Selectable, 95 to 130 VAC, 60 Hz or 220 to 260 VAC, 50 Hz
高度	15.2 cm
寬度	31.1 cm
深度	28.6 cm
凈重	6.8 kg

The Harvard 33 Dual Syringe Pump offers continuous infusion or withdrawal, 24 hours a day, 365 days a year with the accuracy and low flow of a Harvard syringe pump.
 

The Harvard 33 Dual Syringe Pump is a breakthrough in pumping technology. The 33 has two independent pumping channels linked through hardware and software. When combined with a valve box, it provides the continuous delivery of a peristaltic or piston pump with the accuracy, absence of pulsation and low flow rates of a syringe pump.

The Harvard 33 Dual Syringe Pump opens up whole new pumping possibilities.

These are some of the applications of this pump:

• The injection of dyes, perfumes and flavoring in industrial applications

• Applications with liquids or viscous materials in micromanufacturing

• Continuous injections of reactants into reactor vessels

• Simultaneous samplings from two sites

• Continuous injection for long term toxicology testing

Several modes of operation are available to accommodate a range of setups and experimental protocols. A unique movable limit switch mechanism is used to change direction or stop operation of the pump depending on the mode of operation.

Reciprocal/Parallel Mode - Syringe mechanisms can run in the same or opposite directions (i.e. both infusing/withdrawing at the same time or one infusing and the other withdrawing)

Proportional Mode - Different flow rates and syringe diameters can be set for each syringe mechanism

AutoStop Mode - Pump stops operation when a limit switch is activated.

Continuous Run Mode - When a limit switch is activated each syringe mechanism reverses direction.

The pump has high pressure capability and TTL and RS-232 interface for data acquisition and control.

The communication ports enable daisy-chaining of up to 100 pumps.